Mighty Hoop STARTER KIT 5,5"
Product information "Mighty Hoop STARTER KIT 5,5""
Mighty Hoop STARTER KIT 5.5" – The Perfect Introduction to Mighty Hoop and HoopMaster
With the Mighty Hoop® STARTER KIT 5.5", you receive a fully coordinated set that lets you start embroidery with Mighty Hoop’s magnetic frames right away – no complex hooping required. The magnetic frame solution ensures even fabric tension, reduced material wear, and ergonomic handling.
This kit is ideal for both beginners and professionals and includes everything you need – compatible with ZSK embroidery machines.
Included in the set:
- 1 × HoopMaster Station Standard
- 1 × T-Square (alignment tool)
- 1 × Mighty Hoop® Fixture
- 1 × Mighty Hoop® Frame 5,5" × 5,5" (ca. 140 mm × 140 mm)
- 1 × set of frame holder (optionally for ZSK embroidery machines or other machine brands)
Tip: Perfect for getting started with the Mighty Hoop and HoopMaster system – the positioning aid that ensures consistent and repeatable design placement on garments.
Skip product gallery
You might also be interested in
Mighty Hoop - Fixture
Product number:
Product number 2: Z-004-2418-m
Product number 2: Z-004-2418-m
Mighty Hoop Backing Holder
Product number:
Product number 2: Z-008-8948-Master
Product number 2: Z-008-8948-Master
Bottom Ring with weaker Magnets
Product number:
Product number 2: O-000-0534-m
Product number 2: O-000-0534-m
This bottom ring is equipped with weaker magnets than the standard ring of the frame.
The weaker magnets help to better protect delicate materials.
On very thin or stretchable fabrics such as satin, silk, jersey or fine cotton, the magnetic force of the standard frame may leave permanent pressure marks or imprints.
The weaker magnets provide just enough holding force to keep the fabric smooth and wrinkle-free without damaging the fibres.
Further advantages
Ideal for lightweight fabrics:
They are the perfect choice for everyday embroidery on light to medium fabrics where extreme clamping force is not required.
Reduced effort: Less force is needed to release the Mighty Hoop with weaker magnets.
Note: The ring with weaker magnets is supplied only as a bottom ring and is not a complete Mighty Hoop embroidery frame.
Various brands - Fixture
Product number:
Product number 2: Z-004-2422-m
Product number 2: Z-004-2422-m
Mighty Hoop for ZSK embroidery machines
Product number:
Product number 2: Z-004-2417-M
Product number 2: Z-004-2417-M
Mighty Hoop without Brackets
Product number:
Product number 2: Z-004-2523-m
Product number 2: Z-004-2523-m
Mighty Hoop for Barudan
Product number:
Product number 2: O-000-0046-m
Product number 2: O-000-0046-m
Mighty Hoop for Happy
Product number:
Product number 2: O-000-0209-m
Product number 2: O-000-0209-m
Mighty Hoop for Ricoma
Product number:
Product number 2: O-000-0245-m
Product number 2: O-000-0245-m
Mighty Hoop for SWF
Product number:
Product number 2: O-000-0095-m
Product number 2: O-000-0095-m
Mighty Hoop for Tajima
Product number:
Product number 2: O-000-0004-m
Product number 2: O-000-0004-m
Mighty Hoop for Brother PR
Product number:
Product number 2: O-000-0175-m
Product number 2: O-000-0175-m
Mighty Hoop Adjustable FreeStyle Fixture
Product number: 570268
Product number 2: Z-008-1944
Product number 2: Z-008-1944
MIGHTY HOOP FREESTYLE BASE
Product number: 570216
Product number 2: Z-004-2405
Product number 2: Z-004-2405
Spare Part Bottom Ring
Product number:
Product number 2: Z-009-6787-m
Product number 2: Z-009-6787-m
Tubular Frame Support - Brother PR
Product number: 571280
Product number 2: Z-009-4729
Product number 2: Z-009-4729
Tubular Hoop Support – Hoop Stabiliser for Brother PR
The tubular hoop support simply slides onto the tubular arm / bobbin arm of your Brother PR embroidery machine and provides extra stability for embroidery hoops or clamping frames. Especially when working with heavy fabrics, this original support from Mighty Hoop helps relieve undesired pressure off the arms of the machine.
Even when using small or lightweight frames, the tubular hoop support minimises bouncing and vibration during embroidery, contributing to noticeably improved stitch quality.
Note: Compatible with Brother PR 6 and PR 10 tubular embroidery machines.
Key Benefits:
Extra support for embroidery hoops and clamping frames
Reduces strain on the tubular arm
Prevents unwanted movement when using light frames
Quick and easy to install on the tubular arm
Ideal for working with heavy items