CONVERSION KIT K-HEAD THREADLIFTING

Conversion Kit Motor Support Challenger

CONVERSION KIT PICKER (UPGRADE)

CONVERSION KIT SEQUIN HEAD REINFORCING

For ZSK tubular arm embroidery machines with MSCI or MSCF control The conversion kit is suitable for ZSK embroidery machines with 1 head or 2 heads. It includes the components required to adapt the Y-drive in machines of this control generation. Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image) Contents of the conversion kit 1 Stepper Motor with Connection Cable 1 Y-Drive Connection Box, complete with Wiring 2 Heat-Shrink Tubes Mounting Brackets and Installation Hardware JF 0111 - 500 | JF 0211 - 495 | JAF 0115 - 500 | JAF 0215 - 495 | JAFA 0112 - 500 | JAFA 0212 - 495 | JNFA 0112 - 500 | JNFA 0212 - 495

For ZSK tubular arm embroidery machines with MSCI or MSCF control The conversion kit is suitable for ZSK embroidery machines with 4 heads with a head spacing of 400/495 mm or 6 embroidery heads with a head spacing of 400 mm.. It includes the components required to adapt the Y-drive in machines of this control generation. Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image) Contents of the conversion kit 2 Stepper Motor with Connection Cable 2 Y-Drive Connection Box, complete with Wiring 2 Heat-Shrink Tubes Mounting Brackets and Installation Hardware JF 0411 - 400 | JF 0411 - 495 | JF 0611 - 400 | JNF 0411 - 495 | JAF 0415 - 400 | JAF 0415 - 495 | JAF 0615 - 400 | JNF 0415 - 495 | JNF 0615 - 400 | JAFA 0609 - 400 | JAFA 0412 - 400 | JAFA 0412 - 495 | JAFA 0612 - 400 | JNFA 0412 - 400 | JNFA 0412 - 495 | JNFA 0612 - 400

For ZSK tubular arm embroidery machines with MSCI or MSCF control The conversion kit is suitable for ZSK embroidery machines with 6 heads with 495 mm head spacing and 8 heads with 400 mm head spacing. It includes the components required to adapt the Y-drive in machines of this control generation. Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image) JF 0611-495 | JF 0811-400 | JNF 0611-495 | JNF 0811-400 | JAF 0615 - 495 | JAF 0815 - 400 | JNF 0615-495 | JNF 0815-400 | JAFA 0612-495 | JAFA 0812-400 | JNFA 0612-495 | JNFA 0812-400

COVERING

The ZSK Machine Riser is an ergonomic enhancement for ZSK embroidery machines of the RACER series as well as the older J series.

Optimised for the SPRINT 8 ‘Quick Change’ system. For application on: Border frames Pantographs for single frame mounting Cap drive The SPRINT 8 Quick Change system is given optimized protection against unintentional changes to the system settings with this conversion kit due to twisting. Note: For each of the applications – border frames, pantographs for single frame mounting and cap drive – one set is required for conversion. Contents: 2 x Fixture / Mounting Plate 2 x Cap Screw M3x10 DIN7984 (or: Socket Head Cap Screw) 2 x Washer B3.2 DIN125 (or: Flat Washer) 2 x Cap Nut M3 DIN 1587 (or: Acorn Nut) 2 x Button Head Screw M4x6 DIN 913 (or: Set Screw) 2 x Shim Washer 4x8x0.55 DIN 988 Modification You can do the modification yourself. You will need the following tools: 1 x HSS drill bit 2.5 mm, DIN 338 - for normal drilling work in metal.1 x M3 tap (single-cut tap) - for cutting through threads.1 x Allen Key 2.5 mm1 x Allen Key M4

Retrofit kit Quick Change System for SPRINT 5 / 6 / 7The Quick Change System for SPRINT 5 / 6 / 7 is designed to speed up setup times when switching between the different operating modes: border, cap, and tubular arm.After converting the machine to the Quick Change System, non-converted accessories can still be connected to the Quick Change System in the conventional manner. Note: Additional Centering, item no. 360.010.209 can be purchased here in the shop.

RETROFIT KIT SIGNALS COLUMN

Retrofit set 3D (Puffy)

Thread Locator -JCK 01-

THREAD TENSION

thread tension disc