BUTTON CELL HOLDER CR 2425/CR 2430
Product number: 586139
Product number 2: Z-008-2055
Product number 2: Z-008-2055
CABLE ADAPTER VGA MONITOR- MSCA
Product number: 396311144
Product number 2: Z-003-2035
Product number 2: Z-003-2035
CIRCUIT BOARD FWP7- FOR COLOUR CHANGE
Product number: 396781004
Product number 2: Z-000-7925
Product number 2: Z-000-7925
COLOUR-CHANGE BOARD FWP8
Product number: 396781005
Product number 2: Z-000-0405
Product number 2: Z-000-0405
E-PROM MSCD SOFTWARE
Product number: 592734
Product number 2: Z-004-1342
Product number 2: Z-004-1342
EXTENSION CABLE T8-2 (8 METERS)
Product number: 396312145
Product number 2: Z-008-7207
Product number 2: Z-008-7207
FLOPPY DISC EMULATOR
Product number: 396041019
Product number 2: Z-004-1268
Product number 2: Z-004-1268
USB replaces Floppy Disc Drive
Upgrade MSCD-, MSCA- and MSCC Control
One floppy disk drive of a MSCD-, MSCA- or MSCC-Controller will be exchanged by a new ZSK developed USB adapter. This adapter now enables loading designdata via an USB stick
Features
It is possible to save up to 100 floppy discs on the USB stick
Each floppy disc / file can save 64 designs
You can work simultaneously in the second drive with old DD fl oppy discs
It is possible to import DST and DSZ stitch data formats
Note: The floppy disk notation must be marked from 00ZSK to 99ZSK.
MSCD control
To use the hardware of the USB adapter, the latest version of the MSCD control software, available on 5 EPROMs, is also required. These E-Proms must be purchased separately.
IP 1 IDENTIFICATION BOARD 1
Product number: 396792001
Product number 2: Z-000-0406
Product number 2: Z-000-0406
Membrane Keypad for T8 Control Unit
Product number: 597817
Product number 2: Z-003-2002
Product number 2: Z-003-2002
POWER DRIVE UNIT
Product number: 396041015
Product number 2: Z-003-2032
Product number 2: Z-003-2032
Upgrade: New Power Module for MSCI Control Units
This new power module replaces the previous unit 396.041.004 used in ZSK embroidery machines with MSCI control. The upgraded version introduces a key improvement: instead of replacing the entire module in the event of a fault, individual circuit boards can now be exchanged, significantly reducing maintenance costs and machine downtime.
Upgrading to the new power module ensures your machine stays technically up to date, maintains its performance and reliability, and supports long-term production stability.
Note: Installation should only be carried out by qualified technical personnel. If you have any questions, please feel free to contact us.
POWER SUPPLY BOARD SVP10
Product number: 396750006
Product number 2: E-000-9068
Product number 2: E-000-9068
SHAFT ENCODER CPL. WITH WIRE
Product number: 396261004
Product number 2: Z-000-0975
Product number 2: Z-000-0975
SHAFT-ENCODER CPL. WITH WIRE
Product number: 396261001
Product number 2: Z-002-9233
Product number 2: Z-002-9233
