Convert the colour change device – for JCZ and SPRINT 2 T2. Conversion Kit Color Change FWP 7 (ZSK order number 361 998 900). Fitted in → ZSK combination embroidery machine JCZ – spare part catalogue (PDF), assemblies: Color change device type 1 – PDF page 115 Fitted in → ZSK tubular arm embroidery machine SPRINT 2 T2 – spare part catalogue (PDF), assemblies: Color change device – PDF page 65

Convert the colour change device – for JAF and JATA. Conversion Kit Color Change FWP 8 (ZSK order number 362 998 900). Fitted in → ZSK tubular arm embroidery machines JAF/JNF – spare part catalogue (PDF), assemblies: Farbwechseleinrichtung Typ 1 – PDF page 105 Fitted in → ZSK special embroidery machine JATA – spare part catalogue (PDF), assemblies: Farbwechseleinrichtung Typ 1 – PDF page 63

Convert the colour change device – for MCF, SCF and JAF. Conversion Kit Color Change FWP 8 (ZSK order number 282 998 907) on machines with 15 needles per head. Fitted in → ZSK tubular arm embroidery machines JAF/JNF – spare part catalogue (PDF), assemblies: Farbwechseleinrichtung Typ 2 – PDF page 107 Fitted in → ZSK flatbed embroidery machines MCF/LBF/LCF/XCF/XGF/YCF/YGF – spare part catalogue (PDF), assemblies: Color change device – PDF page 131 Fitted in → ZSK flatbed embroidery machine SCF – spare part catalogue (PDF), assemblies: Color change device – PDF page 71

CONVERSION KIT FAN CONTROL

CONVERSION KIT K-HEAD THREADLIFTING

CONVERSION RATE MSCI TO T8-2

For: quality checks with the light off – switchable lighting. Conversion kit for switchable embroidery field lighting (ZSK order number 396 120 020). Retrofit switch on the embroidery machine that allows the embroidery field light to be switched on and off – for example for quality inspections that are preferred with the machine light switched off.

Convert the colour change device – for MCF, SCF, BASIC and more. Conversion Set FWP 7 (ZSK order number 270 998 954) on machines with 5 needles per head. Fitted in the following spare part catalogues (PDF): ZSK flatbed series – standard parts (BASIC) – assembly Color change device, PDF page 57 ZSK combination embroidery machine JCZ – assembly Color change device type 2, PDF page 117 ZSK flatbed embroidery machines MCF/LBF/LCF/XCF/XGF/YCF/YGF – assembly Color change device, PDF page 131 ZSK combination embroidery machines MCZ/XCZ/XGZ/YCZ – assembly Color change device, PDF page 111 ZSK flatbed embroidery machine SCF – assembly Color change device, PDF page 71 ZSK combination embroidery machine SCZ – assembly Color change device, PDF page 101

Upgrade Cross Line Laser.

Upgrade Floppy Emulator USB.   E-PROM MSCD SOFTWARE

USB replaces Floppy Disc Drive. Upgrade MSCD-, MSCA- and MSCC Control One floppy disk drive of a MSCD-, MSCA- or MSCC-Controller will be exchanged by a new ZSK developed USB adapter. This adapter now enables loading designdata via an USB stick   Features It is possible to save up to 100 floppy discs on the USB stick Each floppy disc / file can save 64 designs You can work simultaneously in the second drive with old DD fl oppy discs It is possible to import DST and DSZ stitch data formats   Note: The floppy disk notation must be marked from 00ZSK to 99ZSK.   MSCD control To use the hardware of the USB adapter, the latest version of the MSCD control software, available on 5 EPROMs, is also required. These E-Proms must be purchased separately.

For: protecting the machine electronics – overvoltage. Overvoltage protection retrofit kit (ZSK order number 396 105 013). Low-cost protection for the control electronics in factories with overvoltage issues in the power grid: the protector absorbs the overvoltage before expensive boards get damaged. After the protector trips due to an overvoltage, it must be replaced immediately.

Upgrade or retrofit kit for light barrier for the RACER / JAFA series

For MSCF control units The MCP16/MCP24 to MCP30 conversion kit enables older MSCF control units with MCP16/MCP24 to be electronically upgraded to MCP30. Note: In the event of problems with MSCF control units with MCP16, the upgrade is recommended, as MCP16 is no longer available as a spare part.

For MSCF Control - The MCP30 to MCP35 conversion kit upgrades older MSCF control from MCP30 to MCP35.

Upgrade: New Power Module for MSCI Control Units. This new power module replaces the previous unit 396.041.004 used in ZSK embroidery machines with MSCI control. The upgraded version introduces a key improvement: instead of replacing the entire module in the event of a fault, individual circuit boards can now be exchanged, significantly reducing maintenance costs and machine downtime. Upgrading to the new power module ensures your machine stays technically up to date, maintains its performance and reliability, and supports long-term production stability. Note: Installation should only be carried out by qualified technical personnel. If you have any questions, please feel free to contact us.

Over-Current Protection

For: machine status at a glance – SPRINT CLASSIC, 6, 7 and RACER. Status light retrofit kit (ZSK order number 396 100 036). Shows the operating status of the embroidery machine, visible from afar. Suitable for ZSK SPRINT CLASSIC, SPRINT 6, SPRINT 7 and RACER.

Stop Upgrade for Needle Switch off device - 270003939 

The start/stop remote control simplifies all work that is not carried out in the immediate vicinity of the T8 and is associated with the operation of the start/stop buttons on the T8.  The remote control is ideal for setting work on sequin and bead embroidery devices, for example. The device saves you a lot of time by eliminating the need to walk to the T8 during work or to have a second worker available during adjustment work.

For: pantograph operation – wired push-button box. TKPA 1 pantograph push-button box (ZSK order number 396 221 002). Wired push-button box for directly traversing the pantograph.