HoopMaster
HoopMaster Extender
Product number: 570215
Product number 2: Z-004-2404
Product number 2: Z-004-2404
Station Extender for HoopMaster Standard Station.
The Station Extender makes it easier to hoop larger garments on the HoopMaster Standard Station. It attaches to the top of the 16″ station and expands the working width to 22″. This allows wider or bulkier items to be positioned accurately and hooped with ease.
The extender is one of the most popular accessories for enhancing the versatility of the Standard HoopMaster Station and increasing its usable hooping area.
HoopMaster Infant Station
Product number: 570236
Product number 2: Z-008-0277
Product number 2: Z-008-0277
Systematically easier hooping for toddler sizes.
The HoopMaster Station makes hooping with Mighty Hoop magnetic hoops faster and easier. Its grid system lets you position every embroidery design accurately and repeatably, for example logos on nursery or club wear.
The HoopMaster Infant Station is the smallest station, slightly tapered and designed for toddler sizes up to UK 3–4 years / US 4T.
For larger garments, there are further HoopMaster Stations: HoopMaster Medium Station | HoopMaster Standard Station | HoopMaster XL Station
Scope of delivery and dimensions
Infant Station
Width top: approx. 8 1/2″ (21.6 cm)
Width bottom: approx. 9 3/8″ (23.8 cm)
Length: approx. 19 1/4″ (48.9 cm)
Weight: approx. 8 lbs (3.6 kg)
Application
For embroidery, a Mighty Hoop suited to the design is set on the Infant Station with the appropriate fixture. A noted collar letter and fixture number make every repeat order for children's ranges repeatable without measuring again.
Practical tip: children's garments
As a starting point for a chest logo on children's garments, depending on logo size and cut, allow about 5″ (13 cm) below the collar seam and 3″ (7.6 cm) from the centre.
Optimised workflow
The EPS HoopStation positions even more precisely and faster: it projects individually created guide lines onto the garment and writes the position into the embroidery file.
HoopMaster Medium Station
Product number: 570248
Product number 2: Z-008-0239
Product number 2: Z-008-0239
The HoopMaster for children's to adult sizes (XS).
The HoopMaster Station is a central component of the HoopMaster system. In combination with the appropriate fixture and magnetic Mighty Hoop embroidery hoops, it creates a guided hooping process that allows garments to be positioned quickly, easily and consistently.
The station provides a stable working base: it defines the position of the garment and ensures that placements can be reproduced reliably, regardless of the operator – ideal for production runs and repeat orders.
The HoopMaster Medium Station is narrower than the standard size and suits children's and youth garments as well as slim adult sizes up to XS.
Further sizes in the HoopMaster range: HoopMaster Infant Station | HoopMaster Standard Station | HoopMaster XL Station
Scope of delivery and dimensions
Medium Station with three adjustable angles
Width top: approx. 12 7/8″ (32.7 cm)
Width bottom: approx. 13″ (33.0 cm)
Length: approx. 23 5/8″ (60.0 cm)
Weight: approx. 11 lbs (5.0 kg)
Application
A Mighty Hoop sized to the design goes on the Medium Station, held in the right place by the matching fixture. The collar letter and the number in the fixture's document window define the position – note both and every repeat order is set up the same way.
Practical tip: hooping log
Alongside collar letter and fixture number, note the garment brand, size and logo. Cuts differ between manufacturers – with a log, the right setting is at hand straight away for the next job.
Optimised workflow
The EPS HoopStation offers more tools for precise placement: your own guide lines are projected onto the garment, and the position, fine-tuned once per job, is stored in the embroidery file – nothing needs aligning at the machine.
HoopMaster Standard Station
Product number: 570234
Product number 2: Z-008-0276
Product number 2: Z-008-0276
The basis for easy hooping of garments.
The HoopMaster Station makes hooping garments for embroidery with Mighty Hoop magnetic hoops faster and easier. Its grid system ensures that an embroidery design sits in exactly the same place on every garment and on every reorder, for example logos for corporate wear or club apparel.
The HoopMaster Standard Station is the standard size for women's and men's sizes S to XL. With the HoopMaster Extender, it can be widened to approx. 22″ (56 cm), making sizes up to 3XL possible.
For smaller and larger garments, we offer further HoopMaster Stations: HoopMaster Infant Station | HoopMaster Medium Station | HoopMaster XL Station
Scope of delivery and dimensions
Standard Station, adjustable to three angles
Width: approx. 15 7/8″ (40.3 cm)
Length: approx. 23 5/8″ (60.0 cm)
Weight: approx. 12 lbs (5.4 kg)
Application
For the best embroidery result, fit a Mighty Hoop matched to the design size with its fixture in the right place on the station. The position is defined by two details: the letter the collar is pulled down to and the number in the fixture's document window. Noted on the job sheet, the same setting is back in place instantly for every reorder.
Practical tip: chest logos
As a starting point on adult shirts, depending on logo size and garment brand: logo centre 7–9″ (18–23 cm) below the point where shoulder seam and collar meet for men, 5–7″ (13–18 cm) for women, and 4–5″ (10–13 cm) from the centre. Set up on the middle size of a job – the setting then usually fits one size up and one size down as well.
Optimised workflow
It gets even faster and more precise with the EPS HoopStation: it projects the position onto the garment and writes it into the embroidery file, so there is no aligning at the machine.
HoopMaster XL Station
Product number: 3500079
Product number 2: O-000-0856
Product number 2: O-000-0856
HoopMaster with more surface area for XL garment sizes.
Faster and easier hooping with Mighty Hoop magnetic hoops: the grid system of the HoopMaster Station positions an embroidery design in exactly the same place on every garment, such as company logos on corporate wear.
At approx. 19″ (48.3 cm) wide, the HoopMaster XL Station offers around 3″ (8 cm) more surface area than the standard size, at the same length.
For smaller garments, there are further HoopMaster Stations: HoopMaster Infant Station | HoopMaster Medium Station | HoopMaster Standard Station
Scope of delivery and dimensions
XL Station, angle adjustable to three positions
Width: approx. 19″ (48.3 cm)
Length: approx. 23 5/8″ (60.0 cm)
Weight: approx. 12 lbs (5.4 kg)
Application
For each design, the matching Mighty Hoop is set on the XL Station with its fixture in the intended place. Pull the collar to a letter, set the fixture to a number, note both – and the logo sits accurately again on the reorder.
Practical tip: angle
The manufacturer recommends the middle of the three angles; the steepest setting puts more strain on the wrists when pressing the hoop down. Set flat, the station suits towels and blankets.
Optimised workflow
The EPS HoopStation adds further options: virtual rulers, parallel lines and your own placement areas are projected onto the garment; the position is saved in the embroidery file and can be called up automatically on the ZSK embroidery machine with the barcode scanner.
MIGHTY HOOP EXTENDED MAGNETICS SET
Product number: 570217
Product number 2: Z-004-2406
Product number 2: Z-004-2406
Mighty Hoop STARTER KIT 5.5"
Product number:
Product number 2: 570220-m
Product number 2: 570220-m
Portable Mounting Base
Product number: 570216
Product number 2: Z-004-2405
Product number 2: Z-004-2405
Portable Mounting Base.
The Portable Base serves as a stable platform for all FreeStyle Arms used with HoopMaster and Mighty Hoop Fixtures. It allows flexible hooping of a wide variety of items such as hand towels, beanies, tote bags, duffle bags, laptop sleeves and much more.
When combined with the Adjustable FreeStyle Fixture, narrow or tubular garments such as sleeves or trouser legs can be hooped precisely and effortlessly.
Mighty Hoop – Magnetic Embroidery Frames for Precise and Efficient Work
Whether working with fine fabrics or dense materials, Mighty Hoop magnetic embroidery frames make hooping quick, secure and accurate. The strong magnetic force keeps the fabric flat and in place without the need for manual adjustment, ensuring even stitching with minimal effort.
The Mighty Hoop system is part of a modular concept developed for professional embroidery applications. In combination with the HoopMaster hooping system, it provides a durable and time-saving solution for consistent results in both single and multi-piece production.
Made in the USA – Original by Midwest Products
Mighty Hoop magnetic frames are manufactured in the United States by Midwest Products, the creator of the well-known HoopMaster system. Both systems are precisely matched and built to withstand daily use, offering excellent build quality, durability and ease of handling.
Range and Compatibility
Our range includes a wide selection of Mighty Hoop magnetic frames in various sizes – from small hoops for chest logos to large formats for back designs or full front embroidery.
The magnetic frames can be adapted to a wide range of industrial embroidery machines. The frames are compatible with the following models:
ZSK STICKMASCHINEN 400 / ZSK STICKMASCHINEN 495 / ZSK SPRINT / ZSK RACER / Barudan 380 / Barudan QS 520 / Brother PR / Brother PR10xx / Happy 360 / Happy 500 / Happy 520 / Ricoma 360 / Ricoma 400 / Ricoma 500 / Ricoma 600 / Ricoma EM 1010 / SWF 360 / SWF 392 / SWF 448 / SWF 500 / Tajima–Toyota 360 / Tajima–Toyota 500 / Tajima–Toyota 600
Key Advantages of Mighty Hoop Magnetic Frames
- Maximum embroidery area: The rectangular frame design allows embroidery right up to the corners – making full use of the available space.
- Secure fabric hold: Strong magnets keep the fabric evenly tensioned, preventing shifting or distortion, even on thick or multi-layered textiles.
- Faster workflow: Fabric can be hooped within seconds without screws or fine adjustments – ideal for repeat jobs and high-volume production.
- Ergonomic operation: The magnetic system reduces manual effort and minimises strain on hands and wrists during repetitive work.
- Consistent precision: Constant tension ensures clean, repeatable embroidery results across different fabrics and materials.
Personalised Support
If you are planning to switch to Mighty Hoop magnetic frames or expand your existing setup, our team will be happy to assist you. We provide individual guidance to help you choose the right frame sizes and combinations for your machines, materials and workflow requirements.