Conversion Kit Y-Drive for MSCI/F Control - 1 and 2 Heads
Product information "Conversion Kit Y-Drive for MSCI/F Control - 1 and 2 Heads"
For ZSK tubular arm embroidery machines with MSCI or MSCF control
The conversion kit is suitable for ZSK embroidery machines with 1 head or 2 heads.
It includes the components required to adapt the Y-drive in machines of this control generation.
Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image)
Contents of the conversion kit
- 1 Stepper Motor with Connection Cable
- 1 Y-Drive Connection Box, complete with Wiring
- 2 Heat-Shrink Tubes
- Mounting Brackets and Installation Hardware
JF 0111 - 500 | JF 0211 - 495 | JAF 0115 - 500 | JAF 0215 - 495 | JAFA 0112 - 500 | JAFA 0212 - 495 | JNFA 0112 - 500 | JNFA 0212 - 495
Skip product gallery
Other successor products for stepper motor Y-drive Type 1 – MSCI/F
Conversion Kit Y-Drive for MSCI/F Control - 4 and 6 Heads
Product number: 396120024
Product number 2: Z-008-5998
Product number 2: Z-008-5998
For ZSK tubular arm embroidery machines with MSCI or MSCF control
The conversion kit is suitable for ZSK embroidery machines with 4 heads with a head spacing of 400/495 mm or 6 embroidery heads with a head spacing of 400 mm..
It includes the components required to adapt the Y-drive in machines of this control generation.
Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image)
Contents of the conversion kit
2 Stepper Motor with Connection Cable
2 Y-Drive Connection Box, complete with Wiring
2 Heat-Shrink Tubes
Mounting Brackets and Installation Hardware
JF 0411 - 400 | JF 0411 - 495 | JF 0611 - 400 | JNF 0411 - 495 | JAF 0415 - 400 | JAF 0415 - 495 | JAF 0615 - 400 | JNF 0415 - 495 | JNF 0615 - 400 | JAFA 0609 - 400 | JAFA 0412 - 400 | JAFA 0412 - 495 | JAFA 0612 - 400 | JNFA 0412 - 400 | JNFA 0412 - 495 | JNFA 0612 - 400
Conversion Kit Y-Drive for MSCI/F Control - 6 or 8 Heads
Product number: 396120025
Product number 2: Z-009-2616
Product number 2: Z-009-2616
For ZSK tubular arm embroidery machines with MSCI or MSCF control
The conversion kit is suitable for ZSK embroidery machines with 6 heads with 495 mm head spacing and 8 heads with 400 mm head spacing.
It includes the components required to adapt the Y-drive in machines of this control generation.
Note: The conversion kit replaces the wiring and the stepper motors mounted on the moving housing that drives the lateral movement of the pantograph. (see image)
JF 0611-495 | JF 0811-400 | JNF 0611-495 | JNF 0811-400 | JAF 0615 - 495 | JAF 0815 - 400 | JNF 0615-495 | JNF 0815-400 | JAFA 0612-495 | JAFA 0812-400 | JNFA 0612-495 | JNFA 0812-400